We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 various branches. For more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Introduction:
1. HS series slurry pump is developed for the constant pumping of high abrasive, higher density slurries with minimum maintenance specifications. The putting on parts are produced of ultra chrome or and rubber. It will sustain high efficiency in excess of the put on existence of its parts.
two. The metal moist components and rubber types can be interchangeable for managing diverse liquids or slurries.
3. HS slurry pumps are accessible in measurements ranging from 1 inch to eighteen inch discharge and attribute large effectiveness performance capable of movement charges from 10.8 to 5400 m³/h and heads up to one hundred twenty five meters for higher head models.
Characteristics:
1. Cylindrical construction of bearing assembly: convenient to adju EPT the place amongst impeller and EPT liner
and can beremoved comple tel: +86~13 0571 88828y
2. Interchangeable anti-abrasive wet elements created of higher-chrome alloys
3. Casing halves of ductile iron with external reinforcing ribs give higher operating strain capabilities
and an added evaluate of security.
four. The discharge department can be oriented to any 8 positions at the interval of 45 levels
five. A variety of travel types: DC(immediate connection), V-belt push, gear box reducer, hydraulic couplings, VFD,
S EPT management, and so on
six. The shaft seal makes use of the packing seal, expeller seal and mechanical seal
Common Application:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Waste sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • Building |
| • Alumina Business | • Power Plant | • Potash Fertilizer Plant | • EPT industries |
| • Iron ore sand | • Copper Concentration | • Gold mine | •Molybdenum |
| Design | Max Electricity (Kw) |
Inlet & Outlet dimension (inch) | Material for Use Parts | Circulation Fee (Q) | Head (H) meter |
Speed (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | 15 | 1.5/one | M | twelve.6~28.8 | three.5~8 | 6~68 | 1200~3800 | 152 |
| R | ten.8~twenty five.two | 3~seven | 7~fifty two | 1400~3400 | 152 | |||
| 40HS-B | 15 | 2/1.5 | M | 32.4~seventy two | 9~20 | 6~58 | 1200~3200 | 184 |
| R | 25.2~54 | seven~fifteen | five.5~41 | 1000~2600 | 178 | |||
| 50HS-C | 30 | three/2 | M | 39.6~86.4 | 11~24 | 12~64 | 1300~2700 | 214 |
| R | 36~75.6 | 10~21 | thirteen~forty six | 1300~2300 | 213 | |||
| 75HS-C | 30 | 4/3 | M | 86.4~198 | 24~fifty five | 9~52 | a thousand~2200 | 245 |
| R | 79.2~a hundred and eighty | 22~50 | 5~34.5 | 800~1800 | 245 | |||
| 100HS-D | 60 | 6/four | M | 162~360 | forty~one hundred | 12~56 | 800~1550 | 365 |
| R | 144~324 | forty~90 | twelve~forty five | 800~1350 | 365 | |||
| 150HS-E | 120 | eight/6 | M | 360~828 | one hundred~230 | ten~sixty one | five hundred~1140 | 510 |
| R | 324~720 | ninety~200 | 7~forty nine | four hundred~1000 | 510 | |||
| 200MS-E | one hundred twenty | ten/eight | M | 666~1440 | 185~four hundred | 14~60 | 600~1100 | 549 |
| 200HS-ST | 560 | 10/8 | M | 612~1368 | a hundred and seventy~380 | 11~sixty one | 400~850 | 686 |
| R | 540~1188 | one hundred fifty~330 | 12~50 | 400~750 | 686 | |||
| 250HS-ST | 560 | 12/ten | M | 936~1980 | 260~550 | seven~68 | three hundred~800 | 762 |
| R | 720~1620 | two hundred~450 | seven~45 | 300~650 | 762 | |||
| 300HS-TU | 560 | 14/12 | M | 1260~2772 | 350~770 | thirteen~63 | three hundred~600 | 965 |
| R | 1152~2520 | 320~seven-hundred | 13~forty four | three hundred~500 | 965 | |||
| 350HS-TU | 1200 | 16/14 | M | 1368~3060 | 380~850 | eleven~63 | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/eighteen | M | 2520~5400 | seven hundred~1500 | thirteen~fifty seven | 200~400 | 1370 |
| 25HHS-C | 30 | 1.5/one | M | 16.2~34.2 | four.5~9.five | twenty five~92 | 1400~2200 | 330 |
| 50HHS-D | sixty | 3/two | M | sixty eight.4~136.eight | 19~38 | 25~87 | 850~1400 | 457 |
| 75HHS-E | 120 | 4/three | M | 126~252 | 35~70 | twelve~ninety seven | 600~1400 | 508 |
| 100HHS-E | 120 | 6/four | M | 324~720 | 90~two hundred | 30~118 | 600~1000 | 711 |
| 150HHS-S | 560 | eight/6 | M | 468-1008 | one hundred thirty~280 | 20~ninety four | five hundred~one thousand | 711 |
For the content of donning elements,
“M” = steel, extremely chromium alloy “R” = anti-abrasive rubber
Get in touch with
Welcome to contact us any time for specifics.
Your inquiry will get our prompt focus and reaction !
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 diverse branches. For more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of first products manufacturer’s (OEM) portion numbers or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our organization and the listed substitute elements contained herein are not sponsored, accredited, or produced by the OEM.
