SNOW PLOW Electrical power UNIT

Standard Description
Consisting of a strain balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this electrical power unit is intended to operate materials handling gear. The decreasing motion is achived through the solenoid valve using the lowering pace managed by an adjustable needle valve. The left and appropriate functions are outfitted with a dual pilot operated check valve and cross-over relief valves.
Remark: Please talk to our product sales engineer for your distinct pump displacement, motor energy or tank capability.
Unique Notes
1. This power unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
2. Clean all the hydraulic elements concerned just before set up of the energy unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst, which should really also be clean and absolutely free of impurities.N46 hydraulic oil is advisable.
4. This electrical power unit must be mounted horizontal.
5. Check the oil degree during the tank soon after the initial begin of the energy unit.
six. Oil altering is needed after the preliminary 100 operation hours, afterwards after each and every 3000 hrs.